MMC Flexidip Restricted and Open Gauging Tape

FLEXI-DIP Gauging Tapes (Restricted and Open) Restricted and Open Gauging Tapes provide a convenient and accurate means for measuring ullage, product temperature and the oil-water interface. The units are configured to operate in the trimode, bimode, interface or temperature mode. Each instrument is designed to maximize ease of use. A single penetration of each tank can provide comprehensive data about internal tank conditions. When the electronic probe senses hydrocarbon, a steady tone is heard; when sensing water, it emits an intermittent tone. Temperature is shown on an LED display in the hub of the instrument.

Specifications

Accuracy
>of Tape	+/- 1/8" (+/- 3mm), +/- 0.01% of F.S. tape LGT (F.S. = Full Scale).
>of Temperature Display	+/- 0.5° F (+/- 0.3° C) +/- 1 digit error.
>of Calibration Range	32° F (0° C) to 176° F (80° C).
>of Probe	For dryness to within 3/8 inch (10mm) of bottom
Ambient Temperature Limits
>LCD	same as above.
>Sensor	same as above.
Application:
>Open gauging	("O" type) (Safe product vapors only).
>Restricted gauging	("R" type) via MMC vapor-control valve.
Battery	9-Volt Eveready # 522 or Mallory MN1604.
Operation	U-Ullage, I-Interface (oil/water), T-Temperature.
Tape Length	Tape Length
>Dual-Marked	50 ft. (15m), 75 ft. (25m), 100 ft. (30m), 120 ft. (37m),165 ft. (50m).
>Single-Sided	30m, 100 ft. engineering scale (ft., 1/10 ft., 1/100 ft.)
Typical Weights	>50 ft/15m - "R" 8lbs (3.6kg) "F" 7 lbs. (3.2kg). >100 ft/30m - "R" 9lbs (4.1 kg) "F" 8lbs. (3.6kg). >165 ft/50m - "R" 11 lbs (5 kg) "F" 10 lbs. (4.5 kg).