Your shopping cart is empty!
Availability: 2-3 Days
A 15ppm Bilge Alarm is normally used in connection to a ship's oil filtering equipment (also known as "bilge water separator"), monitoring the oil content of the separated/filtered water and stopping the discharge into the sea if the oil content exceeds 15ppm (parts per million). The 15 ppm bilge alarm type "BilgMon 488" is type approved for this purpose according to latest IMO Rules MEPC.107(49).
Furthermore the 15ppm bilge alarm can in principle be used as a simple oil content alarm for other applications where the water does not contain solids or other substances disturbing the operation.
Versions
When ordering, specify high voltage (115/230V AC) or low voltage (24V AC/DC) version.
Measurement
Oil range
0 – 30 ppm
Resolution
0.1 ppm
Accuracy
According to IMO MEPC.107(49)
Response time
< 3 sec
Alarms
Alarm 1 (valve control) delay
0-10 sec user adjustable
Alarm 2 (annunciation) delay
0-600 sec user adjustable
Alarm points 1 and 2
1-15 ppm user adjustable
Alarm hysteresis:
0.5 ppm (below alarm point)
Data storage and retrieval:
Calibration storage
Stored in sensor housing
IMO required data
Stored in BilgMon488 main housing (sensor housing may be replaced with data remaining on board)
IMO required data retrieval
Via LCD display or USB
User interface
LCD display
2x16 alphanumeric display
Control
4 button keypad
Input/Output
Current output
0 – 20 mA or 4 – 20 mA for 0 – 30 ppm
Communications
USB serial communication (separate cable and software)
Alarm outputs
115/230 V AC model: 2 x relays (0.25A) 24 V AC/DC model: 2 x relays (1A)
Clean water solenoid valve output
115/230 V AC model: 1 x relay (0.5A, supply voltage) 24 V AC/DC model: 1 x relay (1A, supply voltage)
Switch input
1 x switch input for separator status
System and supply
Supply, High voltage version
1 A, 115 or 230 V AC, 50 – 60 Hz
Supply, Low voltage version
1.5 A, 24 V AC (50 – 60 Hz) or 24 V DC
Power consumption electronics
10 VA
Power consumption solenoid
18 VA
Measuring MethodThe FOCAS-1800 using a full optical continuous measuring method* can sure grasp ch..
$0.00 Ex Tax: $0.00
DescriptionFOCAS-1500c Bilge Alarm serves to continuously measure the concentration of oil in the ..
Oil Mist detection, now widely accepted as a means of providing early warning of incipient bearing ..
The OMD-2005 Bilge Alarm Monitor was designed by Deckma Hamburg GmbH for use in conjunction with 15..
The OMD-2008 Bilge Alarm Monitor was designed by Deckma Hamburg GmbH for use in conjunction with 15..
The OMD-11 Bilge Alarm Monitor is an older unit, designed by Deckma Hamburg GmbH, for use in conjun..
The OMD-24 Bilge Alarm Unit has been designed specifically for use in conjunction with 15 ppm oil-w..
OMD-15 is designed for the special requirements on boiler water and condensate fiel..
The OMD-32 Oil-in-Water Monitor has been designed specifically for use in conjunction with oil-wate..
The OMD-21, 15ppm Bilge Alarm exceeds the requirements of IMO Resolution MEPC. 60 (33). With ..
Separator Spares & Equipment, LLC is as an Authorized Sales and Service Agent for the TD-107 M..
Georim is a manufacturer of marine equipment based in Pusan Korea like Bilge pumps, Sludge pumps, Hy..
$4,080.00 Ex Tax: $4,080.00
Features Measurement range : 0~30ppm Measurement precision : 15ppm±5ppm (IMO standard) ..
15 PPM BIlge Alarm Monitor (Oil Content)Model: GBA-150Maker: Georim Eng' Co. LTD Type App..
..
