Your shopping cart is empty!
Availability: 2-3 Days
The OMD-2005 Bilge Alarm Monitor was designed by Deckma Hamburg GmbH for use in conjunction with 15 ppm Oily Water Separator Systems. The performance and specifications of the OMD-2005 comply with IMO Resolution MEPC.107 (49). The OMD-2005 is made up of 3 main components: the Computer Unit, Measuring Cell & Valve Assembly. The Computer Unit includes a memory card (data logger) that records and stores up to 18 month of data. The Measuring Cell houses the optical electronics and corresponds with the computer unit via the communication cable. The Valve Assembly is connected directly to the Measuring Cell and Computer unit and contains a special handle to sense the position of the valve. to sense the position of the valve
Specifications
Property
Value
Range (measurement & indication)
0 - 30 ppm, Trend up to 50ppm
Range (IMO specification)
0 - 15 ppm (according IMO regulations)
Accuracy
better than IMO MEPC.107(49)
Electrical power supply
24V - 240V, AC or DC, automatic voltage adjustment
Electrical power consumption
< 15 VA
Sample
Oily water from separator outlet, 0,1 - 4 l/min
Sample temperature range
+1°C to +65°C
Sample connections
R 1/4" Female
Alarm 1 & 2 Set Points
1 - 15ppm (independently adjustable)
Alarm 1 operating delay for annunciation
1 - 540 sec
Alarm 2 operating delay for control
1 - 10 sec
Alarm contacts
2 independently adjustable switchover contacts
Alarm contact operation mode
De-energized in Alarm State
Alarm contact ratings
3A, 240V each
Alarm output
0 - 20 mA or 4 - 20 mA, for 0-30ppm reversible, ext. Load<150Ω
Display
Green Graphic Display
Ambient temperature
+1°C to +55°C
Class of protection
IP 65
Dimensions
360 x 240 x 100 mm (WxHxD)
Weight
7,3 kgs
Measuring MethodThe FOCAS-1800 using a full optical continuous measuring method* can sure grasp ch..
$0.00 Ex Tax: $0.00
DescriptionFOCAS-1500c Bilge Alarm serves to continuously measure the concentration of oil in the ..
Oil Mist detection, now widely accepted as a means of providing early warning of incipient bearing ..
The Graviner Mk6 OMD is an analogue addressable oil mist detection system, capable of monitoring up..
A 15ppm Bilge Alarm is normally used in connection to a ship's oil filtering equipment (also known ..
The OMD-2008 Bilge Alarm Monitor was designed by Deckma Hamburg GmbH for use in conjunction with 15..
The OMD-11 Bilge Alarm Monitor is an older unit, designed by Deckma Hamburg GmbH, for use in conjun..
The OMD-24 Bilge Alarm Unit has been designed specifically for use in conjunction with 15 ppm oil-w..
OMD-15 is designed for the special requirements on boiler water and condensate fiel..
The OMD-32 Oil-in-Water Monitor has been designed specifically for use in conjunction with oil-wate..
The OMD-21, 15ppm Bilge Alarm exceeds the requirements of IMO Resolution MEPC. 60 (33). With ..
..
