Your shopping cart is empty!
Availability: In Stock
The OMD-24 Bilge Alarm Unit has been designed specifically for use in conjunction with 15 ppm oil-water separator units and has a specification and performance which exceeds the requirements of the International Maritime Organization specifications for 15ppm Bilge Alarms contained in Resolution MEPC. 107 (49).
The unit is supplied with 2 works-adjusted alarms at 15 ppm. Other set points (10 ppm or 5 ppm) are possible and can be adjusted on site at any time by using the buttons at the front panel. If an alarm set point is exceed, the alarms are visible at the front panel and the appropriate relays are switched.
In case of malfunction the System LED at the front panel will change from blinking green to permanent red. For the data logging function the unit requires an status input from the separator. Optionally a 0(4) - 20 mA (equal to 0 - 30 ppm) signal output is available for driving a recorder or external meter.
Specifications
Measuring MethodThe FOCAS-1800 using a full optical continuous measuring method* can sure grasp ch..
$0.00 Ex Tax: $0.00
DescriptionFOCAS-1500c Bilge Alarm serves to continuously measure the concentration of oil in the ..
Oil Mist detection, now widely accepted as a means of providing early warning of incipient bearing ..
The Graviner Mk6 OMD is an analogue addressable oil mist detection system, capable of monitoring up..
A 15ppm Bilge Alarm is normally used in connection to a ship's oil filtering equipment (also known ..
The OMD-2005 Bilge Alarm Monitor was designed by Deckma Hamburg GmbH for use in conjunction with 15..
The OMD-11 Bilge Alarm Monitor is an older unit, designed by Deckma Hamburg GmbH, for use in conjun..
The OMD-32 Oil-in-Water Monitor has been designed specifically for use in conjunction with oil-wate..
The OMD-21, 15ppm Bilge Alarm exceeds the requirements of IMO Resolution MEPC. 60 (33). With ..
OMD-7 MKII Industrial Monitor designed to measure the content of Free Oils, Suspended Solids and Tu..
